INSTALLATION GUIDE

ANPRO WALL PANELS
INSTALLATION GUIDE

Step 1: Measure the area of the wall prior to application with wire gauge or laser

Step 2: Mark the exact position of the first panel on the wall.

Step 3: Use the first grub screw to fix the first panel on the wall

Step 4: Put the hinged lock on the first panel, use a hatch or a nail gun to lock the hatch and the panel to the wall.

Step 5: Install the next panel into the first panel using tongue-and-groove interlocking system.

Step 6: Repeat the 5th step until the wall is completed

Step 7: Bend grooved sheet of the wall panel when install on the wall ‘s edge, corner and fix with adhesive

Follow the same steps for installation of plaster walls, iron frames or wooden frames.

ANPRO SPC FLOORING
INSTALLATION GUIDE

Step 1: Thoroughly check the location before installation

Step 2: Locate the first plank 3-5mm away from the wall.

A multilayer design that includes underlayment will make it easier to install An Cuong flooring.

Step 3: Place the next plank to the first one according to the locking edge.

Use a rubber hammer to tighten joints between the planks.

Depending on the thickness of the flooring, add a pad to the floor edge before knocking to prevent breakage or deformation of the lock.

Step 4: Repeat those above steps until all the planks are installed.

Step 5: Finally, place the skirting board on the wall and fix it with a listello tile trim or silicon sealant to finish the work.

Watch more the AnPro application installation videos on any surface

See more

FREQUENTLY ASKED QUESTIONS

1. How do I know about AnPro product quality?

All AnPro products are manufactured under rigorous processes and specialized in advanced technology. With full inspection procedures through professional Quality Control department: Quality control of imported raw materials, Control and supervision of production process, Quality control of outgoing goods.

2. Does the company undertake OEM projects?

With a strongly invested R&D team, we are constantly developing, diversifying our products and seeking to expand domestic and foreign customers and partners.

Besides the OEM product lines by a team of engineers who have specialized in research and design. We also develop a range of ODM products, tailor-made and tailored to our customers.

3. Are products of AnPro guaranteed for projects with high standards such as hospitals?

The ingredients for AnPro product do not contain formaldehyde. Safe for human health should be used a lot in the interior. The surface coating of the product is hot-pasted, firmly fixed. No peeling, no staining, damp-proof, anti-insect for a long time. AnPro architectural plastic products are the solution to replace communication building materials. The product is also highly resistant to fire, ensuring safety for customers when using it.

AnPro is proud to be the construction unit, providing solutions for the buildings of hospital such as Hanoi K Hospital.

4. Are AnPro cladding and flooring products safe?

An Phat Holdings is now one of the leading companies in the field of advanced technology and environmentally friendly plastic production in Southeast Asia.
Our products are currently exported in many countries around the world and have fastidious customers such as the US, Japan, South Korea …
AnPro is a High-tech Architectural Plastic Building Materials Brand of An Phat Holdings (APH). In 2017, APH & BASF of Germany (the largest chemical group in the world) signed the MOU, under which BASF will transfer technology, train engineers, skilled workers, and provide industry development trends. High-tech plastics for APH and the two sides are committed to accompanying development in Vietnam.

The main ingredient of AnPro products: superfine stone powder and high-class plastic, certified by domestic and foreign quality control units for quality as well as safety for health and the environment. The product does not contain formaldehyde or harmful radiation substances to health.

Besides, An Phat Holdings is also the owner of a professional R&D team and QC team, so AnPro products are regularly researched and developed, and tested for safety and quality continuously during production.

Therefore, customers can be completely assured of the safety of AnPro products.

SGH Test report floỏ 272x400 - Technical info SGH Test report vnhl 271x400 - Technical info

Ngoài ra, Tập đoàn An Phát Holdings cũng là đơn vị sở hữu đội ngũ R&D và QC chuyên nghiệp, dày dạn kinh nghiệp, bởi vậy các sản phẩm AnPro thường xuyên được nghiên cứu phát triển và test độ an toàn, chất lượng liên tục trong quá trình sản xuất.

Do đó, khách hàng hoàn toàn có thể an tâm về sự an toàn của Sản phẩm AnPro.

 

5. What is the commitment to quality and design of AnPro flooring products?

AnPro floor product has been launched and sold widely. Quality as well as product design, AnPro is committed to being equivalent and better than imported products.

SGH Test report floỏ 272x400 - Technical info

 

6. Has the panel film been peeling off for a while?

The wood, wallpaper, stone patterns of AnPro wall panels are researched and products are made with high-tech heat-pressing technology, so they are waterproof, do not peel off, or get moldy in use. The product is safe for the user, with a durability of up to 15-20 years.

7. Can AnPro flooring be used in the bathroom?

AnPro wall panels and flooring are waterproof, anti termite, and prevent the fire from spreading. During use, it can be easily cleaned when there are stains on the wall of the house.

Currently, AnPro is continuing to research to enhance the above features to meet the specific needs for outdoor spaces or buildings with high humidity such as swimming pools, saunas … We will update The latest information on this outdoor product line to customers in the shortest time.

8. Does the company have installation workers?

Currently, AnPro does not execute directly. With the desire to strongly develop distribution to provide AnPro products in the fastest and most extensive manner, AnPro will advise and introduce customers to AnPro’s official dealers and distributors to directly execute construction.

During the implementation, AnPro will be responsible for appointing a supervisory team to be present at the site to advise and guide the Agent and Distributor’s construction team to ensure the quality and aesthetics of the project. before handing over to customers.

9. How is AnPro's marketing communication now?

AnPro develops a communication – marketing plan to effectively support the Sales Department as well as the Dealers and Distributors to reach target customers. At the same time, enhancing the image of AnPro – a pioneer brand in the field of high-tech architectural plastic in Vietnam.

10. How does the factory respond to the goods?

With a production capacity about 4.5 million m2/year, AnPro provides highly applicable Architectural Plastic solutions for all projects from apartments, villas to hotels, resorts, office buildings, schools, hospitals, entertainment centers, … And depending on each order, AnPro product factory will offer a specific delivery time, on average 3-5 days.

11. What are the outstanding advantages products of AnPro?

AnPro has outstanding advantages such as:
– Diversity of products: colors and designs of AnPro products are extremely diverse, providing flexible choices for customers.
– Water-proof, anti-moisture, anti-termite
– Good sound, heat, and bearing insulation
– High durability up to 20 years
– Easy to install, disassemble and reuse
– Save labor costs and installation time
– Made in Vietnam, ensuring product quality and design
– Our products are environmentally friendly, safe for users’ health when it does not contain formaldehyde; Made in Vietnam and guaranteed by international organizations of quality – safety.

12. AnPro has a plastic material, why is the commitment to safety to health?

Manufactured by modern technology, AnPro is a high-tech architectural plastic material that does not contain formaldehyde and other harmful substances such as mercury…. The product is anti-mold, anti-termite, easy to clean, and safe for the health of users.

13. AnPro Floor, AnPro wall panels can solve the problem of humidity, sweating?

Yes. AnPro’s products are composed of many layers (5-layer AnPro Floor, 2-layer Wall Panels) and high-tech compound material, so they are water-proof. Using the AnPro product on walls and floors, you will not be wet or sweaty.

14. Are AnPro products suitable for the Spa space?

Yes. AnPro high-tech interior materials are extremely diverse in colors and designs with wood grain, stone, paper texture, etc., offering a flexible choice of styles such as luxury, nostalgia, modern, or harmony with nature to decorate your spa.

15. Can AnPro products be reused?

Yes. Products can be dismantled and installed from old spaces to new ones easily. 80% is the recoverable rate for reuse of AnPro products. Product durability up to 15-20 years.

16. How does the factory respond to the goods?

An Cuong Building Materials has a 28,000 m2 production facility, with a capacity of 4.5 million m2 / year, located in An Phat Complex Industrial Park in Hai Duong City. We can accommodate all domestic and international orders.

17. How to install AnPro wall panels?

Step 1: Measure the area of the wall prior to application with wire gauge or laser
Step 2: Mark the exact position of the first panel on the wall.
Step 3: Use the first grub screw to fix the first panel on the wall
Step 4: Put the hinged lock on the first panel, use a hatch or a nail gun to lock the hatch and the panel to the wall.
Step 5: Install the next panel into the first panel using tongue-and-groove interlocking system.
Step 6: Repeat the 5th step until the wall is completed
Step 7: Bend grooved sheet of the wall panel when install on the wall ‘s edge, corner and fix with adhesive
Follow the same steps for installation of plaster walls, iron frames or wooden frames.

18. How to install AnPro Flooring?

Step 1: Thoroughly check the location before installation
Step 2: Locate the first plank 3-5mm away from the wall.
A multilayer design that includes underlayment will make it easier to install An Cuong flooring.
Step 3: Place the next plank to the first one according to the locking edge.
Use a rubber hammer to tighten joints between the planks.
Depending on the thickness of the flooring, add a pad to the floor edge before knocking to prevent breakage or deformation of the lock.
Step 4: Repeat those above steps until all the planks are installed.
Step 5: Finally, place the skirting board on the wall and fix it with a listello tile trim or silicon sealant to finish the work.

19. Why choose AnPro product instead of wood, brick, or stone materials?

AnPro high-tech interior materials are the solution to replace materials such as wood, brick, stone, and traditional materials with their outstanding features:
– Diversity of products: colors and designs of AnPro products are extremely diverse, providing flexible choices for customers.
– Water-proof, anti-moisture, anti-termite
– Good sound, heat, and bearing insulation
– High durability up to 20 years
– Easy to install, disassemble and reuse
– Save labor costs and installation time
– Made in Vietnam, ensuring product quality and design

20. Is AnPro floor water permeation and slip?

No. AnPro floor product has a 5-layer structure with high-tech compound material that is waterproof and non-slip. AnPro floor uses Unilin click-lock technology, the coupling point is tight, waterproof, and easy to install.

21. Are the AnPro floors and wall panels easy to clean?

Yes. AnPro products are easy to clean with water that is not absorbent, slippery, and water-absorbent leading to moisture. For difficult to clean stains, you can use warm water or a special solution to clean.
AnPro floor product with UV coating consists of 2 layers and the surface layer is scratch resistance, anti-fouling, reduce surface gloss to make the product more authentic.

22. How to clean the AnPro floor?

– The floor is the place where dust is the most in the course of life, the fastest way to clean it is to put the carpet in front of the entrance to the house, the bathroom door.
– Do not clean with chemicals with strong cleaning properties, only use mild detergents.
– It is necessary to limit the use of cleaning products made of substances such as plastic, yarn, hard and angular cleaning products because this will cause scratches on the floor and wall panels.
– Reduce the collision of sharp, angular objects on the floor and tiling surface. When moving objects on the floor, the tiles must also avoid dragging and scratching the floor.
– Use a soft cloth and squeeze well to clean the floor and panels of AnPro.
– Particularly for AnPro Floor product, the following may be noted:
+ Put pads when storing objects such as bookshelves, shelves
+ Do not wear high heels and shoes with nails or a hard underside because it will most likely scratch the floor.

23.How to buy (customers, project customers, distribuitor) from AnPro?

Please contact hotline: 0888 71 75 76
For quickest purchase advice and support.

 

24. What types of projects are suitable for AnPro's products?

AnPro’s products are suitable for all projects and design styles. With outstanding advantages, AnPro products are the perfect choice for projects from residential and commercial, coastal projects, resorts.

 

25. The durability of AnPro's wood grain wall panels compared to natural wood paneling (industrial wood)?

AnPro’s wood grain panel products have a durability of up to 20 years.
It is coated with a layer of UV to help with color durability, with no peeling or warping. Especially, product does not occur mold, termites, or sweating.

 

26. What are incentives when becoming a distributor of AnPro?

AnPro’s distributors’ system is growing and we are continuing to expand our sales network nationwide.
AnPro is pleased to cooperate with customers to bring quality products to market.
Please contact us via hotline: 0888 71 75 76
To get the fastest advice and policy support for the partners.

27. Which the projects use products of AnPro?

– Hanoi Plastic Joint Stock Company
– Vinhomes Riverside
– Office of Fisheries Department
– White Palace Event Center at Pham Van Dong, HCMC
– Religa Gold Khanh Hoa 5-star hotel
– Le More 5-star hotel
– Flamingo Cat Ba Resort

28. Are products of AnPro flooring and AnPro's panels warped, terminated, and peeling off?

With modern production technology, multi-layer product structure, high-tech materials, AnPro’s products do not warp, termite, or flake during construction and use.

29. Are AnPro products suitable for coastal climatic conditions?

Have. With the coastal climate with high humidity, AnPro’s products are completely suitable for the project here due to light materials, easy construction form, anti-mold, absolute water resistance, the durability of up to 20 years.

30. Advantages of AnPro interior wall panels?

Diversity of models: AnPro is extremely diverse in colors and designs with stones and wood or paper texture, … giving customers a flexible choice in many spaces under many different application styles together.
Waterproof: With a 2-layer structure with high-tech compound material, it is water-proof and anti-termites.
Sound insulation, heat insulation, and bearing capacity: With AnPro wall panels, An Phat Holdings has applied advanced extrusion technology to create a double-layer hollow cell structure, for sound insulation and impact resistance.
High durability: AnPro wall panels can accompany users up to 20 years, while ordinary plastic materials have durability of about 2-3 years, wallpaper life expectancy is 3-5 years on average.
Easy to install, disassemble, and reuse: AnPro can be constructed on rough surfaces, iron frames. During use, if the homeowner moves, up to 80% of the material can be recovered for reuse in the new space.
Save labor costs and installation time: Due to the lightweight, modern click-lock technology, can be installed on the rough surface, so the construction progress of AnPro architectural plastic material is very fast, no need to perform finishing after cladding. As for traditional materials such as ceramic tiles, it takes 3 times more construction time to finish by waiting for the bricks to dry and clear the circuit.
Made in Vietnam: With a system of R&D departments, imported production machinery, and product inspection rooms, AnPro interior paneling is high quality and meeting international and Vietnamese certificates about quality.

31. What are the advantages of AnPro floor?

Diversity of models: AnPro is extremely diverse in colors and designs with stone, wood, carpet texture, etc., offering customers a flexible choice in many spaces under many different application styles together.
Waterproof, fire retardant, preventing insects and termites: With a 5-layer structure and high-tech compound material, it is waterproof, anti-termite, with no curving and shrinkage.
Protect users’ health: With AnPro floor using advanced technology with ingredients that do not contain formaldehyde and harmful chemicals, friendly with the environment.
High durability: AnPro flooring can accompany users up to 20 years, while ordinary plastic materials have durability of about 2-3 years, laminate flooring 5-6 years.
Easy to install, disassemble and reuse: AnPro can be installed directly on the surface. With an underlayment available, it helps to install quickly and helps to create a smooth foot during use. The product is reusable for new construction with up to 80% recovery.
Save labor costs and construction time: Due to the lightweight, modern Unilin click-lock technology, can be installed on the surface with underlayment available in each floor plank.
The finishing time is 3 times faster than the ceramic tile because there is no need to perform a finishing step such as quenching or waiting for the tile to dry.
Made in Vietnam: With a system of R&D departments, imported production machinery, and product inspection rooms, AnPro Floor guarantees 100% quality and is granted international certificates of CE, SGS as well as Vietnam about quality.

CONSULTANCY

1. Advice for antibacterial materials used in clinics

I need to open a private clinic, due to the specific work that is exposed to many pathogens and bacteria, I want the materials to prevent bacteria and clean. Please give me the solution?

Hospital materials have a decisive role in ensuring high specificity. Not only architectural requirements, building materials for hospitals or private clinics are also directly related to the effectiveness of medical examination and treatment, directly affecting the lives and health of staff. medical doctors, sick people. Therefore, with some types of building materials and finishing for hospital buildings or private clinics, there is a much higher requirement than similar materials used for civil works. other.
For walls, it is necessary to choose construction materials with antibacterial properties, easy to clean, and clean daily. AnPro architectural plastic panels with stone and wood patterns are the optimal choice for the office building that he is aiming for. AnPro architectural plastic products are waterproof, the surface is UV layer, prevent mold and bacteria, easy to clean.
Along with modern click-lock technology, which can be installed directly on the surface of a raw wall or wooden, an iron frame makes it easy to install, optimizing both cost and quality for the project.
AnPro commits to customers: to provide products with the best quality and the most competitive prices along with the most attentive customer care services on the market.
Please contact our hotline 0888 71 75 76 to serve.

2. Advice on how to fix mold problem on the house wall

My house is near the lake, the walls have to be repainted every year due to mold. Since it’s been using it for many years, I want to rebuild, fix the mold problem on the wall. Please give me the solution?

The walls of the house are water permeation and wet. The black streaks of mold made the room ugly. With the weather in Vietnam, this is a problem that many homes face. Especially with a place close to a river or a lake like his family. For comprehensive prevention of moisture for both interior and exterior walls:
– The core of the wall should be built using mortar made of golden sand mixed with cement and lime water (do not use solid lime). Or maybe just use yellow sand mixed with cement. The best ratio is 3 parts sand 1 part cement, or 4 parts sand 1 part cement.
When building, it is necessary to use strong flutter so that there are no gaps. The sand-cement mortar dries up very quickly and is strong enough to resist water penetration from the outside to the inside. When plastering, you should only use sand-cement mortar mixed with lime water, not thick lime.
– Instead of the usual mastic and paints, using AnPro architectural plastic panels are the optimal option to help the wall resist moisture. The installation is very simple with locking wort and screws, without the use of glue, helping to make the wall paving right on the rough brick surface, minimizing the flat and flat steps, saving costs. AnPro wall panels with the main component are the high-tech compound that is waterproof, the surface is UV cover, prevents mold and bacteria, and is easy to clean.

E-CATALOGUE

Brochure AnPro flooring wall board ENG 1 - Technical info
Download